If you are here, then you may be looking for a stock firmware flash file for your LYF Jio LF-2406. If yes, then you are in the right place. In this guide, we will help you to flash the stock ROM on LYF Jio LF-2406 by using the QFil Flash tool, QPST Flash Tool or MSM download tool.
We have shared all the pre-requisites files to download and install the stock ROM on your device.
How to Install Stock ROM on LYF Jio LF-2406
Before installing the Stock ROM on your LYF Jio LF-2406, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: LYF Jio LF-2406
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Download Drivers and Tools: Qualcomm USB drivers, QFil Flash Tool or QPST, and LYF USB Drivers
Download Flash Files
Instructions to install:
After downloading the firmware file for LYF Jio LF-2406 from the link above, you will need to use the Qualcomm Flash image loader Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely.
Instructions to Install via QFIL Tool:
Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using QFIL tool
That’s it, guys. We hope that you’ve installed the Stock Firmware on your LYF Jio LF-2406 device successfully. Feel free to ask in the comments below for any queries.
- LYF Jio F90M Flash File – Download and Install Stock ROM Guide
